==============================================================================
|    Super Micro Computer, Inc. Copyright Reserved 1993-2018                 |
|    Micro Code Update Package Version 1.0.0 (Legacy)                        |
==============================================================================

Requirement:
  The microcode update tool supports FreeDOS only.  Please refer to FreeDOS
  website at http://www.freedos.org/ for more information.

Usage:
  SMCI_MCU.exe

==============================================================================

Supported Platform:

Tylersburg
 Xeon Motherboards - Socket B (LGA 1366)

(Reference: https://www.supermicro.com/products/motherboard/)

==============================================================================


Supermicro Microcode Update (MCU) Package Instructions:


1. Create a bootable USB flash drive with FreeDOS.
   (Note: A shareware like Rufus with built-in FreeDOS support can be used.)

2. Unzip the SMCI MCU package & copy the content into the USB flash drive.

3. Plug the USB flash drive from step 1 into the system for microcode update,
   and boot into FreeDOS with the USB flash drive.

4. If a prompt with options appears, select option to return to DOS.

5. In DOS, change folder to where SMCI_MCU.exe is.

6. Enter command: SMCI_MCU.exe, and press ENTER.

7. Wait until the microcode update is complete.  Do NOT interrupt it.

8. After the update is finished, reboot the system to finalize the update.
